BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//SPE Product Design and Development Division - ECPv6.15.20//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-WR-CALNAME:SPE Product Design and Development Division
X-ORIGINAL-URL:https://pd3.4spe.org
X-WR-CALDESC:Events for SPE Product Design and Development Division
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:America/New_York
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20240310T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20241103T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20250309T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20251102T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20260308T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20261101T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20270314T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20271107T060000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:America/Chicago
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20240310T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20241103T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20250309T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20251102T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20260308T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20261101T070000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250318T080000
DTEND;TZID=America/New_York:20250320T170000
DTSTAMP:20260415T132601
CREATED:20241227T191127Z
LAST-MODIFIED:20241227T191127Z
UID:1084-1742284800-1742490000@pd3.4spe.org
SUMMARY:PD3 at PTXPO!
DESCRIPTION:North America’s Premier Molding and Moldmaking Event\n\n\nPTXPO 2025 is a comprehensive showcase of cutting-edge technologies and innovations within the plastics molding industry. Join fellow molders\, moldmakers\, brand owners\, OEMs and their full suite of suppliers in Rosemont\, IL for three days of non-stop networking\, education and business development opportunities. \nWe are thrilled to announce that PD3 will be at PTXPO this year! Feel free to visit us! \n\nVisit the PTXPO Website Here
URL:https://pd3.4spe.org/event/pd3-at-ptxpo/
CATEGORIES:Conference
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250429T080000
DTEND;TZID=America/Chicago:20250501T160000
DTSTAMP:20260415T132601
CREATED:20250408T182130Z
LAST-MODIFIED:20250408T182416Z
UID:1173-1745913600-1746115200@pd3.4spe.org
SUMMARY:Plastic Injection Mold Design: Basic and Advanced Topics
DESCRIPTION:In this plastic injection molding course\, you’ll enjoy a comprehensive exploration of injection mold design that not only enhances your understanding but also equips you to drive overall project success. Through a unique approach\, you’ll gain a profound comprehension of detailed mold design concepts set forth in the context of the whole design process. \nAs you progress\, you’ll cultivate a strategic mindset for achieving cost savings throughout the process\, and review projects at each important juncture to master advanced concepts. \nBy enrolling in this course\, you’ll emerge with an enriched perspective on injection molding and design\, equipped to make significant contributions to projects’ triumphs through your comprehensive grasp of both design intricacies and cost-efficient strategies. \n\nThis course can be applied to the following certificate:\nPlastics Technology Certificate \n\n  \n\nBenefits and Learning Outcomes\n\nDemonstrate advanced cavity and core inserting\nAnalyze your current issues regarding plastic injection molding\nIdentify mold design concepts\nAvoid costly mistakes\nJustify and evaluate your purchases of molds\nRecognize advanced parting line\, shut-off development\, advanced slide and lifter design\n\n\n\nCourse Outline/Topics\nDay 1 & 2 \nIntroduction and Overview \nThe Anatomy of a Mold \nMold Types \n\nStripper plate molds\nUnscrewing molds\nQuick change molds\nHot runner molds\nShuttle molds\n\nBasic Mold Construction \n\nUse and placement of bolts and dowels\nMajor suppliers and differences between them\nHow to specify and order mold bases and components\n\nCommon Components and their Function \n\nLeader pins\, return pins\, support pillars\, rest buttons\, etc.\n\nThe Molding Press \n\nHow the mold interfaces with the press\nHorizontal and vertical clamp\nShuttle and rotary presses\n\nPlastic Resin Fundamentals \n\nAmorphous and semi-crystalline\nBasic properties and how they affect the mold design\n\nShrink \n\nHow to use shrink to your advantage\nFactors that affect shrink and warp\n\nPlastic Product Design Fundamentals \n\nCommon errors\nWhat the mold designer needs to look for in a product design\n\nSprue\, Runner and Gate \n\nCommon gate design errors\nRunner sizing guidelines\nRunner pullers\n\nEjection \n\nDetermining ejector place\nPin orientation methods\nKnock-out patterns\nReturn pins and springs\n\nBasic Mold Inserting \n\nSolid vs split construction\nCriteria for inserting\n\nSlides and Lifters \n\nA thorough look at how to mold undercuts\nTypical slide and lifter construction\nMechanical vs hydraulic\n\nCavity Layout \n\nHow to efficiently “place“ the cavities in the mold and choose the best parting line\nHow it affects runners\, ejection and gates\n\nCooling \n\nThe economic effect of cooling design\nGeneral rules for waterline placement\nThermal conductivity of various tool steels\n\nVenting \n\nVenting of runners\nHow venting affects the molded part\nWhy this should NOT be overlooked\n\nMold Steel \n\nWhat to look for in a mold steel\nA discussion of steel hardness\nAlternate materials used in molds\n\nPlating and Polishing \n\nA selection chart for mold coatings\nWhen and why to use plating\n\nDay 3 \n\nStructural design considerations\nEjector pin placement\nSupport pillar/plate thickness calculations\nFit tolerances/machining precision\nMold and part design considerations for multi-shot molding\n\nCore shift \n\nLSR and HCR mold design considerations\nUnscrewing collapsible core technology\nMold maintenance considerations\n\nInjection molding simulation for toolmakers/tool designers for driving engineering decisions \n\n\n\n\nWho Should Attend\nAnyone responsible for procuring\, evaluating\, building or designing injection mold tools\, including tooling engineers\, buyers\, toolmakers\, mold designers\, product designers\, managers and molders. \n\n\nInstructor\n\nErik Foltz \nErik Foltz is a certified professional Moldflow® consultant at The Madison Group. Foltz received his MS from the Polymer Engineering Center at the University of Wisconsin-Madison. Foltz’s work concentrates on assisting industrial clients accelerate the product design process through the… read more
URL:https://pd3.4spe.org/event/plastic-injection-mold-design-basic-and-advanced-topics/
LOCATION:UWM\, 3203 N Downer Ave\,\, Milwaukee\, WI\, 53211\, United States
CATEGORIES:Event,Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250610T080000
DTEND;TZID=America/New_York:20250611T170000
DTSTAMP:20260415T132601
CREATED:20250414T124331Z
LAST-MODIFIED:20250414T125938Z
UID:1177-1749542400-1749661200@pd3.4spe.org
SUMMARY:Introduction to Polymer Characterization: Molecular Architecture\, Morphology and Thermomechanical Response
DESCRIPTION:Announcing a Live Virtual Short Course\, sponsored by the Golden Gate Polymer Forum \nJune 10-11\, 2025 \nThis course provides a comprehensive overview of commonly implemented polymer characterization techniques to evaluate molecular composition\, structure\, processibility\, and physical properties. A review of polymer characterization techniques will cover relevant instrumentation and its operation\, sample preparation\, data analysis\, and measurement limitations. Brief presentations will highlight the underlying theoretical principles\, but the presentations will focus on experimental design and data interpretation. Case studies will be employed to highlight the application\, utility and nuances of measurement approaches through real data. The course is designed for all education levels and is accessible even with minimal background polymer knowledge. \nList of topical areas: \n\nChromatographic and spectroscopic techniques for evaluation of molecular information\nMicroscopy and scattering techniques for morphology and structure analysis\nThermal analysis techniques for probing thermal transitions and polymer stability\nMechanical techniques for plastic and viscoelastic properties\nRheological experiments to assess processibility and influence of processing on polymer performance\nTopical examples around emerging technologies\n\nInstructors \n\nProf. Tim Long\, Arizona State University\nProf. Mike Bortner\, Virginia Tech\nProf. Karen Winey\, University of Pennsylvania\nProf. Mark Dadmun\, University of Tennessee\, Knoxville\nDr. Giles Dillingham\, Brighton Science\nProf. S. Eileen Seo\, Arizona State University\n\nLogistical & Registration Notes \nCourse timing:  Tues. June 10 – Wed. June 11\, starting each day at 8:30 AM Pacific time. \nThis course is very affordably priced – note discounted early registration deadline: \n$400 early registration ends at 11:59 PM Pacific time\, Wednesday\, April 9 \n$500 regular registration ends at 8:00 PM Pacific time\, Wednesday\, May 21. \n$600 late registration\, if still available\, ends at 8:00 PM Pacific time\, Wednesday\, June 4. \nGGPF may close registration earlier if in our opinion class size is becoming too large. \nFull Course Details and Registration at  https://ggpf.org/events/?ee=327
URL:https://pd3.4spe.org/event/introduction-to-polymer-characterization-molecular-architecture-morphology-and-thermomechanical-response/
CATEGORIES:Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250624T110000
DTEND;TZID=America/New_York:20250624T120000
DTSTAMP:20260415T132601
CREATED:20250604T121515Z
LAST-MODIFIED:20250604T121515Z
UID:1191-1750762800-1750766400@pd3.4spe.org
SUMMARY:WEBINAR Optimizing Plastic Color Formulation: Sustainable Practices to Reduce Waste
DESCRIPTION:Optimizing Plastic Color Formulation: Sustainable Practices to Reduce Waste\nCut Costs\, Boost Efficiency & Nail That Perfect Shade! \nIn a world of rising tariffs and tighter budgets\, getting your color formulation just right isn’t just smart—it’s essential. \nJoin us for a dynamic and practical webinar on plastic color formulation where we break down how dialing in your color strategy can help you:\n✅ Slash waste✅ Improve process efficiency✅ Boost profitability✅ Hit your sustainability targets\n \nYou’ll walk away with expert insights on navigating raw material challenges\, reducing rework\, and fine-tuning your color formulations for standout results—every time. \nReady to stay ahead of economic uncertainty and keep your production line vibrant and efficient? Don’t miss this session! \n\n\n\n\n\n\n\n\n\n\n\nAbout the Presenters\n\n\n\n\n\n\n\n\n\n\n\n  \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\nTony Bolynn is a Senior Applications Engineer for Consumer Products and Materials division for X-Rite\, Incorporated. Tony is a member of SPE and has presented papers for SPE and multiple color organizations. \nTony’s career in color began in 1994 with Datacolor after graduating from Appalachian State University. In 1999 he joined Gretag-Macbeth as an Applications Engineer for paint\, plastics and inks working with global companies. In 2006\, Gretag-Macbeth merged with X-Rite and Tony became a Senior Applications Engineer. In his time at Gretag-Macbeth and X-Rite\, Tony has conducted hundreds of training courses\, seminars\, webinars\, and virtual courses.
URL:https://pd3.4spe.org/event/webinar-optimizing-plastic-color-formulation-sustainable-practices-to-reduce-waste/
CATEGORIES:Webinar
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250818T080000
DTEND;TZID=America/New_York:20250820T170000
DTSTAMP:20260415T132601
CREATED:20250812T180955Z
LAST-MODIFIED:20250812T181123Z
UID:1286-1755504000-1755709200@pd3.4spe.org
SUMMARY:Injection Molding Principles
DESCRIPTION:Course Description\nInstructor: Brad Johnson \nFee: $1\,600 \nEducational Goals\nThe Injection Molding Principles workshop is designed to provide a thorough understanding of injection molding basics and terminology. Hands-on experience through lab exercises reinforces the concepts introduced in the classroom sessions. While in the lab\, a maximum of four participants per press will allow each participant the opportunity to learn by doing. Participants are encouraged to bring their problem parts to the workshop for diagnosis and discussion during the problem-solving session. \nWho Should Attend\nThose who want to improve their knowledge of thermoplastic injection molding technology and the language needed to succeed in the business of plastics should plan to participate. Among those who can benefit from this two-and-one-half-day workshop are operators\, process and project engineers\, manufacturing engineers\, molding technicians\, team leaders\, designers\, mold makers\, and sales and marketing staff. \nCourse Outline\n\nOverview of the Injection Molding Cycle\n\nThe injection unit\nThe clamp\nThe mold\n\n\nInjection Control\n\nThe feedback loop\nCharting pressure and velocity\nUtilizing velocity-controlled filling\nPressure limited velocity\n\n\nPlastics Flow During Injection Molding\n\nThe worm analogy\nLaminar flow and fountain flow\nEffects of temperature\, pressure\, and molecular weight\n\n\nShrinkage and Volume Changes\n\nPressure-volume-temperature relationship\nAmorphous and semi-crystalline materials\nCavity pressure and mold shrinkage\nFlow and temperature effects\nFiber fillers\n\n\nProblem Solving\n\nQuality planning\nTroubleshooting common molding defects\nDOEs and other tools\n\n\nMolding Strategies\n\nTraditional molding\nTwo-stage molding\nThree-stage molding\nVelocity to pressure transfer methods\nProcess monitoring\nInitial mold tryout procedure
URL:https://pd3.4spe.org/event/injection-molding-principles/
CATEGORIES:Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250820T080000
DTEND;TZID=America/New_York:20250822T170000
DTSTAMP:20260415T132601
CREATED:20250812T181404Z
LAST-MODIFIED:20250812T181423Z
UID:1288-1755676800-1755882000@pd3.4spe.org
SUMMARY:Injection Molding Troubleshooting
DESCRIPTION:Course Description\nInstructor: Brian Young \nFee: $1\,600 \nEducational Goals\nSpecifically designed for the practicing molder\, this workshop focuses on developing new and enhancing existing shop floor troubleshooting skills for solving molded-part defects and improving part quality problems. Each day\, participants will rotate through six to eight microprocessor-controlled machines that have been set up with special\, case-study molds. These molds have been modified over time to produce a specific molded part defect under a given set of less-than-optimal molding conditions. Participants will analyze and attempt to solve real molding problems. \nWho Should Attend\nThis two-and-one-half-day workshop is geared to those who wish to improve their knowledge of thermoplastic injection molding. It is designed to provide the greatest value possible to injection molding practitioners who troubleshoot problem parts to increase molding efficiency and decrease part defects/rejects. Beyond machine operators\, a variety of others can benefit from the workshop\, including process and project engineers\, manufacturing engineers\, and team leaders. \nCourse Outline\n\nSurface Defects\n\nFlow lines and jetting\nSplay (moisture or trapped air)\nHaze\, blush\, and poor gloss\nOrange peel and surface ripples\nGate blush and gate splay\n\n\nBurning and Contamination Problems\n\nBurn marks and black specks\nBurn streaks\nContamination\nDiscoloration or poor color match\n\n\nPhysical Problems\n\nFlash and short shots\nSink marks\nVacuum voids and bubbles\nBlisters and delamination\n\n\nGeometry Maintenance Problems\n\nUnder- or over-sized dimensions\nPoor dimensional repeatability (poor Cpk)\nWarpage and bowing\n\n\nStructural Defects\n\nCracking\, crazing\, and brittleness\nWeld lines\nStuck parts and pin push marks\nLong gates and plugged gates\nDrag marks and mold damage\n\n\nTroubleshooting Procedures and Logic\n\nHow to effectively approach\, analyze\, and implement troubleshooting procedures.\n\n\nExploring Root Causes\n\nExplore the root causes of the various defects from the perspective of the plastic material as it fills\, compresses\, and cools within the cavity.\n\n\nPart Defectives and Potential Solutions\n\nSome attention will be given to potential design-related problems\, but the emphasis will be on how to optimize the part quality with process-related solutions.\n\n\nTroubleshooting Guides (The Good\, The Bad\, The Efficient)\n\nA comparison of the different troubleshooting guide formats\, including which tend to be most effective for solving molded part problems.\n\n\nInterpreting Velocity and Pressure Shot Traces\n\nThe graphical outputs of the injection pressure and injection velocity traces provide a window into the mold that was not previously available on older machines. Proper interpretation of these shot traces can simplify and speed up the troubleshooting process.\n\n\nApplying Designed Experiments for Advanced Troubleshooting\n\nInsight into how and when to implement designed experiments (DOEs) for difficult-to-solve defects or quality problems with poor repeatability.\n\n\nEvaluating Attendees’ Molded Part Samples\n\nDefective part samples brought in by the participants will be discussed in a group format. An understanding by the participants of the processing conditions or a current process set-up sheet will greatly facilitate this discussion.
URL:https://pd3.4spe.org/event/injection-molding-troubleshooting/
CATEGORIES:Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250903T093000
DTEND;TZID=America/New_York:20250903T100000
DTSTAMP:20260415T132601
CREATED:20250805T175122Z
LAST-MODIFIED:20250805T175155Z
UID:1270-1756891800-1756893600@pd3.4spe.org
SUMMARY:WEBINAR SERIES – Beyond Prototyping: Innovative AM Applications & Materials
DESCRIPTION:From September 3rd to 24th\, 2025\, the 3Dnatives team\, in collaboration with Stratasys\, invites you to join the free “Beyond Prototyping: Innovative AM Applications & Materials” webinar series. Each Wednesday of the month from 16:30 CEST / 10:30 EDT (30 minutes per session)\, a different expert will guide you through real-world insights into additive technologies. \n\n\n\n\nWebinar #1 – Pushing the Limits of Prototyping: Precision\, Performance\, and New Polymer Materials\n\nPrototyping continues to be a core additive manufacturing application—but the tools and materials available today enable much more than concept modeling. This webinar explores how advanced polymers and multi-material printing capabilities are enabling micron-level accuracy\, functional strength\, and aesthetic realism in a single build. We’ll also dive into the next frontier of prototyping innovation\, like direct 3D printing on fabrics. Capabilities such as Smart Insert placement and Print-on-Objects are expanding what’s possible—from embedded components to seamless integration with textiles—redefining how prototypes are built and what they can do. \n\nWebinar #2 – Carbon Fiber Composites: Boosting Tooling with AM\n\nAdditive tooling is transforming how manufacturers approach jigs\, fixtures\, and production aids. In this webinar\, we’ll explore how carbon fiber-reinforced polymers are replacing metal in high-load applications—offering comparable performance at reduced weight and cost. Real-world case studies from automotive\, aerospace\, and heavy industry illustrate how teams are accelerating tooling lead times from weeks to hours. We’ll also discuss new software workflows that enable easy adoption without extensive AM experience\, streamlining the path from design to factory floor. \nWebinar #3 – From Prototypes to Production: AM Materials for Aerospace and Defense Innovation\nAdditive manufacturing is becoming increasingly viable for production\, proving its value for low volumes and customization\, as well as high-performance applications. This session focuses on the aerospace and defense sectors\, where material and process innovations are enabling production-ready parts with high thermal\, mechanical\, and chemical resistance. We’ll explore high-accuracy silicon-based AM for sealing\, FST or ESD compliant tooling and parts\, connector components\, and rapid tooling. Discover how engineers are achieving technical specs and business ROI for real-world deployment. \nWebinar #4 – Maximizing AM Performance with Advanced Software Workflows\nAdditive manufacturing success depends not just on hardware and materials—but on software that enables precision\, repeatability\, and efficiency at scale. In this webinar we’ll explore how Stratasys advanced software platforms like GrabCAD Print™\, GrabCAD Print Pro™\, and OpenAM™ are optimizing AM workflows across industries. Learn how engineers are leveraging features like model-aware slicing\, traceability\, automated support generation\, and open material parameter tuning to streamline operations and unlock new use cases—from prototyping to production. \n\n\n\n\nSpeakers\n\n\n\nGulay Bozoklu\nApplication Development Technical Service Manager\n\n\n\n\n\n\nNaftali Eder\nManager Application Engineering\n\n\n\n\n\n\nAnirudh “Kumar” Krishnakumar\nSenior Product Manager\n\n\n\n\n\n\nNiccolò Giannelli\nFDM Enablement Director
URL:https://pd3.4spe.org/event/webinar-series-beyond-prototyping-innovative-am-applications-materials/
LOCATION:Online
CATEGORIES:Webinar
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20251112T080000
DTEND;TZID=America/New_York:20251113T170000
DTSTAMP:20260415T132601
CREATED:20250929T184142Z
LAST-MODIFIED:20250929T184142Z
UID:1318-1762934400-1763053200@pd3.4spe.org
SUMMARY:AMI Plastics World Expos: North America
DESCRIPTION:This 2-day FREE expo is packed with networking opportunities\, invaluable knowledge sharing\, and groundbreaking innovations – all aimed at driving your business forward. \nStop by the SPE Cleveland booth R2812 to connect with us and explore how membership can enhance your career. \n🔵 November 12-13\, 2025\n🟠 9:30 – 5:00 PM ET\n🟣 Huntington Convention Center of Cleveland\n🟢 300 Lakeside Ave E\, Cleveland\, OH 44113\n🟡 FREE
URL:https://pd3.4spe.org/event/ami-plastics-world-expos-north-america/
CATEGORIES:Conference,Event
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260318T080000
DTEND;TZID=America/New_York:20260503T170000
DTSTAMP:20260415T132601
CREATED:20260318T151317Z
LAST-MODIFIED:20260318T151956Z
UID:1359-1773820800-1777827600@pd3.4spe.org
SUMMARY:Registration OPEN for 2026 Plastics Seminars
DESCRIPTION:Registration is now OPEN for UMass Lowell’s \nPlastics Engineering Seminars!. \nLearn More and Register \nWhether you are in engineering\, sales and marketing\, or research and development\, join us for a seminar on various topics. \nRegister soon to secure your spot! Click the date to learn more and enroll. \nPROCESSING \nRobust Processing Development and Scientific Molding \nSuhas Kulkarni | Offered June 3-5 \nInjection Molding \nDr. Stephen Johnston | Offered June 8-12 and July 13-17 \nLiquid Silicone Rubber Injection Molding  \nDr. Matthew Bont | Offered July 8-9 \nExtrusion \nDrs. Carol Barry & Anne Soucy | Offered July 20-22 \nPlastics Twin-Screw Extrusion and Compounding NEW! \nDr. Meg Sobkowicz Kline | Offered July 23-24 \nDESIGN \nPlastic Part Design for Injection Molding \nDr. Stephen Johnston | Offered June 1-4 and July 7-10 \nMATERIALS \nPlastics in Medical Devices \nDrs. Meg Sobkowicz Kline & Amy Peterson | Offered June 29-July 1 \nPlastics Materials \nDr. Akshay Kokil | Offered June 15-18 and August 24-27 \nThermoplastic Elastomers NEW! \nDrs. Joey Mead & Jinde Zhang | Offered June 1-2
URL:https://pd3.4spe.org/event/registration-open-for-2026-plastics-seminars/
CATEGORIES:Seminar,Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260323T080000
DTEND;TZID=America/New_York:20260325T170000
DTSTAMP:20260415T132601
CREATED:20260318T152222Z
LAST-MODIFIED:20260318T152222Z
UID:1364-1774252800-1774458000@pd3.4spe.org
SUMMARY:National Week of Flame Retardants 2026
DESCRIPTION:Are you navigating increasing regulatory pressure around flame retardant (FR) use and chemical safety? Do you struggle to evaluate new FR technologies\, alternatives\, and additive packages with confidence? Are you looking for clearer guidance on testing requirements\, compliance expectations\, and material performance across industries? \nIf you’re responsible for evaluating FR technologies\, selecting additives\, or ensuring compliance across industries\, then you need to be at SPE’s National Week of Flame Retardants 2026\, taking place online March 23-25 from 9:00 am – 12:00 pm ET each day. \nThis three-day program delivers a focused\, technical overview of: \n\nHalogen-free flame retardant innovations and material performance tradeoffs\nThe evolving regulatory landscape impacting FR use and chemical safety\nCurrent testing standards and compliance expectations across key industries\n\nAt SPE’s National Week of Flame Retardants\, you’ll hear directly from flame retardant technical experts\, regulatory specialists\, and major suppliers—and gain practical insights that you can apply to your processes immediately. \nMore Info Here 
URL:https://pd3.4spe.org/event/national-week-of-flame-retardants-2026/
CATEGORIES:Webinar
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260414T080000
DTEND;TZID=America/New_York:20260417T170000
DTSTAMP:20260415T132601
CREATED:20260318T154203Z
LAST-MODIFIED:20260318T154301Z
UID:1372-1776153600-1776445200@pd3.4spe.org
SUMMARY:SPE WORKSHOP - Smart Injection Molding: Hands-on Design of Experiments (DOE) for Success and Competitiveness
DESCRIPTION:April 14\, 15 & 17\, 2026 | Online\n11:00 AM – 12:30 PM ET (each day) \nLearn More \nDo you struggle to identify the real root cause of molding defects? Are you tired of relying on guesswork\, intuition\, or tribal knowledge? \nDo you want to reduce scrap\, stabilize processes\, shorten startups\, and justify process settings with data instead of trial‑and‑error? \nIf you’re troubleshooting molding defects by trial-and-error\, you’re losing time and margin. This three-day\, practice-oriented workshop delivers a structured\, repeatable approach to process optimization—built specifically for injection molding professionals. \nThis program is for you if you need to: \n\nIdentify the true root causes of defects\nReduce scrap and stabilize processes\nShorten start-ups\nReplace guesswork with data\nJustify process settings with measurable ROI\n\nRather than theory-heavy lectures\, this workshop focuses on machine-side Design of Experiments (DoE)—practical tools you can apply immediately. Across three focused 90-minute sessions\, you will learn how to plan\, execute\, and interpret efficient experiments that deliver meaningful insight into part quality\, process robustness\, and optimization opportunities. \nYou’ll leave with a practical DoE toolkit that strengthens decision-making\, improves consistency\, and enhances competitiveness.
URL:https://pd3.4spe.org/event/spe-workshop-smart-injection-molding-hands-on-design-of-experiments-doe-for-success-and-competitiveness/
CATEGORIES:Workshop
ORGANIZER;CN="SPE-Inspiring Plastics Professionals":MAILTO:spe@4spe.org
END:VEVENT
END:VCALENDAR