BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//SPE Product Design and Development Division - ECPv6.15.18//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-ORIGINAL-URL:https://pd3.4spe.org
X-WR-CALDESC:Events for SPE Product Design and Development Division
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:America/Chicago
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20230312T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20231105T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20240310T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20241103T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20250309T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20251102T070000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:America/New_York
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20230312T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20231105T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20240310T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20241103T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20250309T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20251102T060000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20240124T120000
DTEND;TZID=America/Chicago:20240124T130000
DTSTAMP:20260403T143459
CREATED:20240104T145424Z
LAST-MODIFIED:20240117T205253Z
UID:781-1706097600-1706101200@pd3.4spe.org
SUMMARY:Design For.... Success When Undertaking Metal to Plastic Conversion Projects
DESCRIPTION:Plastics and composites offer designers a unique opportunity to reduce part cost while improving part and assembly quality. However\, when undertaking a project that is looking to convert a part or assembly from more traditional materials to these polymeric based materials\, extra attention needs to be given to the performance requirements of the end assembly\, and how material selection and manufacturing may influence the overall part quality of the final molded product. This talk will highlight what properties of these composites and plastics need to be evaluated to make the conversion a success. Additionally\, the speaker will highlight how simulation tools like structural FEA and Moldflow can be proactively utilized to help minimize failure modes or late design changes that will derail your project. \nErik Foltz is a Senior Managing Engineer at The Madison Group. For over 15 years\, Erik has worked with his  customers\, across all industries\, to successfully design and manufacture plastic components through all phases of the product design process. His specialties include plastic part design verification\, process optimization and troubleshooting for injection and compression molding\, and plastics failure root cause analysis. He has experience with thermoplastic\, thermoset\, elastomeric\, and composite materials. Erik is also a Certified Professional Moldflow® Consultant.
URL:https://pd3.4spe.org/event/design-for-success-when-undertaking-metal-to-plastic-conversion-projects/
CATEGORIES:Webinar
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240131T080000
DTEND;TZID=America/New_York:20240201T170000
DTSTAMP:20260403T143459
CREATED:20231117T190005Z
LAST-MODIFIED:20231117T190127Z
UID:721-1706688000-1706806800@pd3.4spe.org
SUMMARY:The Future of Rotomolding: Hosted by the SPE Rotational Molding Division
DESCRIPTION:Get inside information about what the future holds for rotational molding at SPE’s must-attend event\, “The Future of Rotomolding: Making Our Industry Innovative & Sustainable.” \nConnect with rotational molding leaders and learn about the trends that are shaping the industry moving forward. \nWhy Attend? \n\nStay on top of new rotational molding technologies: Keeping up with the ever-evolving world of rotational molding technology is essential. Our event will feature expert speakers and cutting-edge sessions to ensure you’re well-informed about the latest advancements.\nGain awareness about future trends: The rotational molding industry is constantly evolving\, and “The Future of Rotomolding” is your chance to stay ahead of the curve. Discover the emerging trends that will define the future of our industry.\n\nLearn how rotational molding is becoming more innovative and sustainable: Sustainability is a key focus of our event. You’ll learn about the innovative and sustainable practices that are driving the future of rotational molding.
URL:https://pd3.4spe.org/event/the-future-of-rotomolding-hosted-by-the-spe-rotational-molding-division/
CATEGORIES:Webinar
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240205T080000
DTEND;TZID=America/New_York:20240206T170000
DTSTAMP:20260403T143459
CREATED:20231204T140305Z
LAST-MODIFIED:20231204T140305Z
UID:742-1707120000-1707238800@pd3.4spe.org
SUMMARY:Medical Plastics - Innovations for Life
DESCRIPTION:SPE’s Medical Plastics MiniTec will be held on Monday\, February 5th\, and Tuesday\, February 6th\, a day prior to and concurrent with the first day of the 2024 MD&M West Expo & conference in the Anaheim Convention Center. \nFor more information\, follow this link: https://www.imengineeringwest.com/en/education/conference/spe-mpd-minitec.html \n 
URL:https://pd3.4spe.org/event/medical-plastics-innovations-for-life/
LOCATION:Anaheim Convention Center\, 800 W Katella Ave\, Anaheim\, CA\, 92802\, United States
CATEGORIES:Conference
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240205T080000
DTEND;TZID=America/New_York:20240207T170000
DTSTAMP:20260403T143459
CREATED:20240201T162441Z
LAST-MODIFIED:20240201T182400Z
UID:830-1707120000-1707325200@pd3.4spe.org
SUMMARY:Plastics in AI: Reducing Plastic Waste Through Artificial Intelligence and Digitalization
DESCRIPTION:Find out more info here \nIn this event\, we will explore how artificial intelligence (AI) and digitalization are revolutionizing the plastic industry\, offering robust solutions that can effectively mitigate plastic waste and optimize its usage through increased recycling. By harnessing the power of intelligent algorithms in conjunction with advanced technologies like the Internet of Things (IoT) and geolocation\, waste collection in urban areas can be significantly improved and optimized. \nSmart bins\, integrated with AI capabilities\, will be highlighted as they play a pivotal role in sorting materials at their source\, maximizing the recycling potential of plastics and other materials. Moreover\, state-of-the-art recycling plants are now incorporating cutting-edge technologies such as image sensors\, various sensors\, and machine learning algorithms\, resulting in enhanced efficiency and precision in the sorting process. This facilitates a more accurate categorization of materials\, contributing to effective waste management. Digitalization technologies will be discussed\, highlighting their potential in enhancing the traceability of products. By enabling efficient identification of material composition\, these technologies play a crucial role in streamlining the recycling process. \nAdditionally\, generative design algorithms will be explored\, showcasing their ability to create innovative products and packaging designs that minimize the use of plastic and materials\, while still meeting performance specifications. During the event\, we will discuss the latest advancements in these technologies and delve into the challenges and opportunities surrounding their implementation. Furthermore\, we will explore the potential impact of these innovations on plastic waste handling. \nThis event serves as a platform for knowledge exchange and sharing insights on these cutting-edge solutions\, highlighting their significance in the ongoing fight against plastic waste.
URL:https://pd3.4spe.org/event/plastics-in-ai-reducing-plastic-waste-through-artificial-intelligence-and-digitalization/
CATEGORIES:Webinar
ORGANIZER;CN="SPE-Inspiring Plastics Professionals":MAILTO:spe@4spe.org
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240206T080000
DTEND;TZID=America/New_York:20240208T170000
DTSTAMP:20260403T143459
CREATED:20231026T125951Z
LAST-MODIFIED:20231026T125951Z
UID:685-1707206400-1707411600@pd3.4spe.org
SUMMARY:Plastec & MD&M West
DESCRIPTION:MD&M West has developed into one of the leading medical device trade shows in the US. Inspired by the life-saving solutions and innovations that companies all over the world push to evolve\, MD&M West’s mission is to unify the international medical device community together to support the growth of their company objectives and push the boundaries of the medical field to save and improve lives across the globe. \nWith thousands of verified attendees\, over 1\,600 exhibiting MedTech suppliers\, and dozens of education sessions led by medical experts\, MD&M West features products and insights across medical specialties such as medical devices\, digital health\, hospital equipment and supplies\, cardiovascular solutions\, pharmaceuticals\, and much more! \nPlastec West – Exhibitor Sectors \nhttps://www.imengineeringwest.com/en/show/show-brands/plastec-west.html \nPlastics & Polymers\nMolds & Dyes\nCoatings & Finishings\nThermoforming\nAgriculture\nMedical Devices\nEnergy Efficiency\nLean Manufacturing\nand more \nMD&M West- Exhibitor Sectors in the MedTech \nhttps://www.imengineeringwest.com/en/show/show-brands/mdm-west.html \nMedical Devices & Technology\nDigital Health\nHospital Equipment & Supplies\nCardiovascular\nPharmaceuticals\nand more \n 
URL:https://pd3.4spe.org/event/plastec-mdm-west/
LOCATION:Anaheim Convention Center\, 800 W Katella Ave\, Anaheim\, CA\, 92802\, United States
CATEGORIES:Conference
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240213T110000
DTEND;TZID=America/New_York:20240213T120000
DTSTAMP:20260403T143459
CREATED:20240104T143731Z
LAST-MODIFIED:20240104T143731Z
UID:776-1707822000-1707825600@pd3.4spe.org
SUMMARY:Plastic Datasheets: What They Do and Don't Tell Us
DESCRIPTION:https://www.4spe.org/i4a/pages/index.cfm?pageID=8558
URL:https://pd3.4spe.org/event/plastic-datasheets-what-they-do-and-dont-tell-us/
CATEGORIES:Webinar
ORGANIZER;CN="SPE-Inspiring Plastics Professionals":MAILTO:spe@4spe.org
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240218T080000
DTEND;TZID=America/New_York:20240221T170000
DTSTAMP:20260403T143459
CREATED:20240201T141823Z
LAST-MODIFIED:20240201T141823Z
UID:820-1708243200-1708534800@pd3.4spe.org
SUMMARY:SPE International Polyolefins Conference
DESCRIPTION:The SPE International Polyolefins Conference brings together producers\, suppliers\, processors\, marketers\, application developers\, regulators\, and thought leaders in polyolefin technology from around the world. It is the biggest polymer conference in the world dedicated to Polyolefins. The 2024 SPE International Polyolefins Conference will be held at the Galveston Convention Center in Texas on February 18-21\, 2024. While the conference is best experienced face-to-face\, virtual registration allows remote attendees to access all the papers and even interact with authors\, other attendees\, and virtual exhibitor booths. The virtual content of the conference will be available to all registrants for at least three months after the conference. \nFind out more about the event here \n 
URL:https://pd3.4spe.org/event/spe-international-polyolefins-conference/
CATEGORIES:Conference
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20240304
DTEND;VALUE=DATE:20240308
DTSTAMP:20260403T143459
CREATED:20230830T120012Z
LAST-MODIFIED:20230831T005910Z
UID:300-1709510400-1709855999@pd3.4spe.org
SUMMARY:ANTEC® 2024
DESCRIPTION:SPE is hosting  ANTEC® 2024 at the Marriott St. Louis Grand in St. Louis\, Missouri. \nANTEC® 2024 will showcase the latest advances in industrial\, national\, laboratory\, and academic work focused on plastics and polymer science. \nAt ANTEC®\, there are multiple opportunities to spend time with colleagues at SPE-hosted meetings\, receptions\, an Honors and Awards Luncheon\, and additional SPE Chapter networking events.
URL:https://pd3.4spe.org/event/antec-2024/
LOCATION:Marriott St. Louis Grand\, 800 Washington Ave\, St. Louis\, MO\, 63101\, United States
CATEGORIES:Conference,Event
ATTACH;FMTTYPE=image/png:https://pd3.4spe.org/wp-content/uploads/2023/08/ANTEC.png
ORGANIZER;CN="SPE-Inspiring Plastics Professionals":MAILTO:spe@4spe.org
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240404T110000
DTEND;TZID=America/New_York:20240404T120000
DTSTAMP:20260403T143459
CREATED:20240215T135707Z
LAST-MODIFIED:20240215T135749Z
UID:840-1712228400-1712232000@pd3.4spe.org
SUMMARY:Polypropylene: Commodity Resin\, I Don't Think So
DESCRIPTION:Polypropylene is often referred to as a “commodity resin”\, however\, is this really the case? \nPolypropylene is a versatile thermoplastic that can be processed through a variety of processing techniques. It is utilized in a wide range of applications\, including packaging\, automotive\, infrastructure\, appliances\, healthcare\, and electrical. It’s wide use is based upon several key strengths\, including: \n\nGood chemical resistance\nGood electrical insulation properties\nFlexural strength and modulus\nRelatively low coefficient of friction\nReadily available and relatively inexpensive\n\nThe implication of the interchangeability of polypropylene resins does a disservice to the complexity of this material and the plastic industry in general. The properties of polypropylene are highly dependent on molecular weight and molecular weight distribution\, crystallinity\, type and proportion of comonomer\, and tacticity. \nHopefully\, after the webinar\, attendees will \n\nGain an understanding of the general properties of polypropylene.\nHave more insight into how the molecular structure of polypropylene determines its performance properties.\nAppreciate the diversity of polypropylene.
URL:https://pd3.4spe.org/event/polypropylene-commodity-resin-i-dont-think-so/
ORGANIZER;CN="SPE-Inspiring Plastics Professionals":MAILTO:spe@4spe.org
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20240417T120000
DTEND;TZID=America/Chicago:20240417T130000
DTSTAMP:20260403T143459
CREATED:20240318T122345Z
LAST-MODIFIED:20240318T122429Z
UID:891-1713355200-1713358800@pd3.4spe.org
SUMMARY:Design For...Webinar Series: DOE Applied to Secondary Operations for Plastic Parts
DESCRIPTION:Design of Experiments (DOE) has long been used with injection molding and extrusions. DOE is a statistically based methodology for developing empirical equations. The test structure and interpretation is highly effective and efficient. A less recognized DOE application area is for plastic part secondary operations. This can include plasma treatment\, ultrasonic welding and bonding. We will discuss the basics about DOE and explore a few common case studies applications\, to understand the power of DOE for manufacturing processes. \nREGISTER HERE\nPresenter: Perry Parendo\, President\, Perry’s Solutions\, LLC \nBio: Perry began developing and seeing results from his Design Of Experiments (DOE) techniques at the General Motors Research Labs in 1986. His unique insight into DOE has saved time and money while solving complex problems during product and process development. This paved the way for him to lead multi-million-dollar New Product Development (NPD) projects with international teams. He is a recognized thought leader and shares his practical insights with international audiences. \nParendo founded Perry’s Solutions\, LLC in 2006 to help organizations with critical product development activities. He has consulted in a wide range of industries such as consumer products\, biomedical products and heavy equipment. He is currently a regular columnist for Design News. He received his Mechanical Engineering degree from the University of Minnesota.
URL:https://pd3.4spe.org/event/design-for-webinar-series-doe-applied-to-secondary-operations-for-plastic-parts/
CATEGORIES:Webinar
ATTACH;FMTTYPE=image/png:https://pd3.4spe.org/wp-content/uploads/2024/03/Design-For.-Webinar-Series_april_2024_Page_1.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240423T080000
DTEND;TZID=America/New_York:20240423T170000
DTSTAMP:20260403T143459
CREATED:20240403T165039Z
LAST-MODIFIED:20240403T165039Z
UID:908-1713859200-1713891600@pd3.4spe.org
SUMMARY:SPE Online Workshop: The Four Milestones to Leverage an Injection Molding Project
DESCRIPTION:Join SPE: Inspiring Plastics Professionals for their online workshop \nHurry\, seats are limited! Register now to secure your spot at: https://www.4spe.org/i4a/pages/index.cfm?pageID=8732 \nLed by the expert instructor\, Andres Urbina\, this workshop will delve deeply into the key milestones of injection molding projects: product design\, tooling\, machine\, and material. You’ll gain a comprehensive understanding of how each element impacts project success and learn practical strategies to enhance your projects. \nThrough interactive discussions and hands-on activities\, you’ll uncover the interplay between these critical aspects and learn how to navigate challenges effectively. Whether you’re new to injection molding or a seasoned professional\, this workshop offers invaluable insights for achieving excellence in your projects. \nDon’t miss this opportunity to elevate your skills and knowledge in injection molding.
URL:https://pd3.4spe.org/event/spe-online-workshop-the-four-milestones-to-leverage-an-injection-molding-project/
CATEGORIES:Workshop
ORGANIZER;CN="SPE-Inspiring Plastics Professionals":MAILTO:spe@4spe.org
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240506T090000
DTEND;TZID=America/New_York:20240510T150000
DTSTAMP:20260403T143459
CREATED:20230830T120050Z
LAST-MODIFIED:20230831T005929Z
UID:306-1714986000-1715353200@pd3.4spe.org
SUMMARY:NPE2024: The Plastics Show
DESCRIPTION:Visit SPE at Booth W15 at NPE2024 in Orlando\, Florida\, from May 6th-10th at the Orange County Convention Center (OCCC). \nWith more than 55\,000 leaders from over 110 countries representing every industry—from automotive to healthcare to consumer products to construction and more\, NPE is the largest plastics trade show in the Americas and one of the most innovative business events in the world. \n\n  \n\n 
URL:https://pd3.4spe.org/event/npe2024-the-plastics-show/
LOCATION:Orange County Convention Center\, 9800 International Drive\, Orlando\, FL\, 32819\, United States
CATEGORIES:Conference,Event
ATTACH;FMTTYPE=image/png:https://pd3.4spe.org/wp-content/uploads/2023/08/NPE2024-logo-770x400-1.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240517T103000
DTEND;TZID=America/New_York:20240517T180000
DTSTAMP:20260403T143459
CREATED:20240403T135650Z
LAST-MODIFIED:20240403T135650Z
UID:902-1715941800-1715968800@pd3.4spe.org
SUMMARY:SPE Central Indiana: 2024 Day at the Track
DESCRIPTION:Find out more about the event here: https://centralindiana.4spe.org/events/2024-day-at-the-track/ \nAlso\, Kimball Medical Solutions will be hosting the “FUEL-UP 500” to support the Day at the Track. Kimball will providing breakfast and giving tours of their injection molding area\, clean room\, and automation area. \nPlease contact Kyle Kulwicki if you wish to attend! \nkyle.kulwicki@kimballelectronics.com \n  \n  \n  \n  \n 
URL:https://pd3.4spe.org/event/spe-central-indiana-2024-day-at-the-track/
LOCATION:Indianapolis Motor Speedway\, 4790 W 16th St - Tower Terrace Suite 002\, Indianapolis\, IN\, 46222
CATEGORIES:Conference
ORGANIZER;CN="SPE-Inspiring Plastics Professionals":MAILTO:spe@4spe.org
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240520T110000
DTEND;TZID=America/New_York:20240520T130000
DTSTAMP:20260403T143459
CREATED:20240429T145934Z
LAST-MODIFIED:20240429T145934Z
UID:935-1716202800-1716210000@pd3.4spe.org
SUMMARY:Fundamentals of Plastic Material Selection
DESCRIPTION:Summary\nSelecting the right plastic material is a challenging task. While there are numerous online tools available for researching plastic materials\, they do not provide any insight into the process of material selection. This workshop will provide a methodology to select materials effectively. \nUsing common language\, we will translate general terms about a material’s characteristics – such as stiffness\, strength\, and toughness – into specific technical properties that are relevant – and quantifiable – to the intended application. We will review industry standard tests that are used to quantify material properties\, and discuss how to interpret the data and understand the behavior of the material to assess its use in an intended application. \n\nSession 1 – Material Science Refresher\nSession 2 – Key Plastic Materials\nSession 3 – Performance\, Cost\, and Sustainability\nSession 4 – Managing the Material Specification Process\n\nDates: \nMay 20\, 2024 \nMay 21\, 2024 \nMay 22\, 2024 \nMay 24\, 2024 \n \nEric Larson\nOwner & Founder\nArt of Mass Production\n\nEric R. Larson has over forty years experience in plastics engineering. He is the founder of Art of Mass Production\, an engineering consulting company based in San Diego\, CA. He has worked on a diverse range of products\, including disposable lighters\, cell phones\, office chairs\, and hand-held medical devices. Eric has a keen understanding of materials\, and knows the value of good design. He also writes and teaches about the effective use of plastics. His book Plastics Materials Selection: A Practical Guide was nominated for a PROSE Award. It is available on Amazon\, and in over 600 university libraries in more than 20 different countries.
URL:https://pd3.4spe.org/event/fundamentals-of-plastic-material-selection/
CATEGORIES:Workshop
ORGANIZER;CN="SPE-Inspiring Plastics Professionals":MAILTO:spe@4spe.org
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240523T110000
DTEND;TZID=America/New_York:20240523T120000
DTSTAMP:20260403T143459
CREATED:20240215T135954Z
LAST-MODIFIED:20240215T140018Z
UID:845-1716462000-1716465600@pd3.4spe.org
SUMMARY:Thermal Analysis in Failure and Compositional Analysis
DESCRIPTION:Thermal analysis is an important group of tests used in the analysis of plastics and other polymeric materials. It consists of a family of well-established techniques that evaluate material properties as they change with temperature\, time\, and ambient environment under conditions of thermal programming. The results of thermal analysis tests provide qualitative and quantitative information about the material being evaluated. In particular\, this information is important to address plastic failures or in characterization of the material composition and physical properties. \nThe upcoming webinar on thermal analysis will introduce the four primary techniques: \n\nDifferential Scanning Calorimetry (DSC)\nThermogravimetric Analysis (TGA)\nThermomechancial Analysis (TMA)\nDynamic Mechanical Analysis (DMA)\n\nThe webinar is designed to introduce the techniques to the attendees so that they may get a better understanding of how the techniques can be used to evaluate plastic materials and solve problems. No single thermal analysis technique is best suited universally\, but together they provide essential data for the characterization of plastics materials. This presentation will review thermal analysis techniques and their application to plastic problem solving through case studies. The webinar will be a practical treatment of the techniques\, and the focus will be on how the techniques can be utilized to better understand polymeric materials.
URL:https://pd3.4spe.org/event/thermal-analysis-in-failure-and-compositional-analysis/
CATEGORIES:Webinar
ORGANIZER;CN="SPE-Inspiring Plastics Professionals":MAILTO:spe@4spe.org
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240604T080000
DTEND;TZID=America/New_York:20240606T170000
DTSTAMP:20260403T143459
CREATED:20240201T142228Z
LAST-MODIFIED:20240201T142228Z
UID:823-1717488000-1717693200@pd3.4spe.org
SUMMARY:Plastec South
DESCRIPTION:Find Out More Here: https://www.imengineeringsouth.com/en/show-info/show-brands/plastec-south.html
URL:https://pd3.4spe.org/event/plastec-south/
LOCATION:Charlotte Convention Center\, 501 S College St.\, Charlotte\, North Carolina\, 28202
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240607T120000
DTEND;TZID=America/New_York:20240607T130000
DTSTAMP:20260403T143459
CREATED:20240510T132121Z
LAST-MODIFIED:20240510T132242Z
UID:952-1717761600-1717765200@pd3.4spe.org
SUMMARY:Between the Layers Panel Discussion: Additive Manufacturing Materials and Innovations for Aerospace and Defense
DESCRIPTION:Summary\nThis kick-off event of the virtual panel discussion series “Between the Layers” will feature a conversation with industry experts from across the value chain about materials and innovations in Additive Manufacturing (AM) for Aerospace & Defense (AeroDef) applications. We will discuss topics like the following: \n\nCurrent AM materials & processes being used in AeroDef\nChallenges such as the need for repeatability\, traceability\, inspect-ability\, material property allowable data\, and qualification/certification\nSpecific needs for the AeroDef market\, e.g. high performance\, digital twin/digital thread\, connectivity\, and cybersecurity\nFuture directions for high-performance AM materials & processes.\n\nThe event will also offer time to ask your questions and join the discussion. \nJoin this event if you work with high-performance AM materials & processes\, if you are part of the AeroDef value chain\, or if you want to learn more about these areas! \nRegister Here
URL:https://pd3.4spe.org/event/between-the-layers-panel-discussion-additive-manufacturing-materials-and-innovations-for-aerospace-and-defense/
CATEGORIES:Webinar
ORGANIZER;CN="SPE-Inspiring Plastics Professionals":MAILTO:spe@4spe.org
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240624T090000
DTEND;TZID=America/New_York:20240624T170000
DTSTAMP:20260403T143459
CREATED:20240503T174859Z
LAST-MODIFIED:20240503T175338Z
UID:945-1719219600-1719248400@pd3.4spe.org
SUMMARY:2024 SPE Chicago Golf Outing
DESCRIPTION:Find out all the details here: https://lp.constantcontactpages.com/ev/reg/ycs7y6p \n 
URL:https://pd3.4spe.org/event/2024-spe-chicago-golf-outing/
CATEGORIES:Golf Outing
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240708T090000
DTEND;TZID=America/New_York:20240708T183000
DTSTAMP:20260403T143459
CREATED:20240607T150733Z
LAST-MODIFIED:20240607T150733Z
UID:966-1720429200-1720463400@pd3.4spe.org
SUMMARY:Milwaukee SPE Golf Outing
DESCRIPTION:Schedule of events to include: \n9:15 am Registration – Pro Shop \n10:00 am Call to the Golf Carts – Course \n10:15 am Shotgun Start – Course \n11:00 am Box Lunch – Turn \n2:30 pm Ballroom Bar Open (Cash) Light Snacks & Appetizers Available \n4:00 pm Dinner – Awards and Speeches \nRemember to bring those Food Drive Donations! \n  \nDonations\, Sponsorships and Door Prizes Accepted and Encouraged! Golf & Dinner: $195.00 Dinner Only: $55.00 \n  \nTable Reservations: $20 per table of 10 \nHole Sponsorships: $250 per hole (22 Available) \nCoffee & Donut Sponsorship: $250.00 (1 Available) \n  \nSPE Donations: \nBronze Donation: $100.00 \nSilver Donation: $300.00 \nGold Donation: $400.00 \nPlatinum Donation: $500.00 \nPlatinum Plus: $1000.00
URL:https://pd3.4spe.org/event/milwaukee-spe-golf-outing/
CATEGORIES:Golf Outing
ORGANIZER;CN="SPE-Inspiring Plastics Professionals":MAILTO:spe@4spe.org
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20240718T120000
DTEND;TZID=America/Chicago:20240718T130000
DTSTAMP:20260403T143459
CREATED:20240624T133706Z
LAST-MODIFIED:20240711T005210Z
UID:969-1721304000-1721307600@pd3.4spe.org
SUMMARY:Design For....Webinar Series: Plastics Circularity Opportunities and Challenges
DESCRIPTION:Register Here \nAddressing plastic waste and transitioning to a low-carbon\, circular economy are the biggest challenges faced\nby the plastic industry globally. As a leading material science company\, Dow is seeking\, together with partners\,\nsolutions based on advanced recycling\, mechanical recycling\, bio-based materials\, and product innovations to design recyclable packaging formats. Dow has committed to accelerating the circular ecosystem by\ntransforming waste and alternative feedstock to deliver 3 million metric tons per year of circular and renewable\nsolutions by 2030. \nREVOLOOP™ resins create a second life for plastic waste that would otherwise end up in landfills\, incinerators\, or litter in oceans and the environment. In the recycling industry\, discarded plastic waste is hauled to a facility to be separated by hand and/or automation; bales of sorted and cleaned plastics are then reprocessed into pellets. Even the best post-consumer recycled (PCR) pellets are inherently inferior and can only be down-cycled or used at less than 100% of the virgin resin counterpart. REVOLOOP™ resins counterbalance PCR deficiencies by well-controlled waste collection system\, proprietary performance boosters\, and advanced processing to remove contaminants. Commercialization of REVOLOOP™ resin is the result of innovations in PCR characterization\, new molecular design\, and cost-effective manufacturing at world-scale. It has been demonstrated that polyethylene (PE) PCR can be up-cycled into film applications by designing tailored performance boosters to recover the performance. \nRegister Here \nAbout the Speakers: \nAkanksha Garg: Akanksha Garg earned her Ph.D. degree in computational mechanics from Carnegie Mellon University in 2014 and received her undergraduate degree in mechanical engineering from IIT Kanpur\, India\, in 2009. She joined Dow in 2017 and is currently a Research Scientist in Product R&D\, Packaging & Specialty Plastics. She has led the development and commercialization of novel polyethylene resins in industrial and consumer packaging\, health and hygiene\, and post-consumer recycle (PCR) resins. Plastic News recognized her as a ‘Rising Star’ in 2021. In addition\, Dr. Garg represents Dow at the Society of Plastics Engineers as a board member\, the Awards and Recognition team\, and as a speaker at SPE conferences. She has also shown leadership in the community\, being the president of the non-profit IIT Alumni of Greater Houston\, is active in the Society of Women’s Engineers\, as well as at Dow-sponsored STEM events. \nMahesh Sawant: Mahesh Sawant is a Senior Research Scientist in Plastics & Hydrocarbons business at Dow Chemical. He started his career at Dow in 2007 where he worked extensively on process development\, scale-up and commercialization of bespoke products for multiple Dow businesses. In 2019\, Mahesh moved to his current role in Plastics Circularity and Sustainability where he leads the technology validation and implementation of key projects globally for advanced recycling of plastics and leads methodology development\, evaluation\, and external communication of sustainable plastics LCAs. He actively coaches young engineers within the organization\, mentors students via community STEM activities and is currently coaching research graduates from HBCU (NCA&T University) and Department of Energy on a government sponsored research program. Mahesh has received 6 Dow global technology innovation and business excellence awards for commercializing breakthrough processes and products and is a co-inventor of 14 granted US patents. He was recently featured in Americas Change Makers showcase by the ACC Plastics division.
URL:https://pd3.4spe.org/event/design-for-webinar-series-plastics-circularity-opportunities-and-challenges/
CATEGORIES:Webinar
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240919T110000
DTEND;TZID=America/New_York:20240919T120000
DTSTAMP:20260403T143459
CREATED:20240603T201351Z
LAST-MODIFIED:20240603T201351Z
UID:958-1726743600-1726747200@pd3.4spe.org
SUMMARY:Polyketone: Understanding the Material and Properties
DESCRIPTION:Find out more here
URL:https://pd3.4spe.org/event/polyketone-understanding-the-material-and-properties/
CATEGORIES:Webinar
ORGANIZER;CN="SPE-Inspiring Plastics Professionals":MAILTO:spe@4spe.org
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20241010T110000
DTEND;TZID=America/New_York:20241010T120000
DTSTAMP:20260403T143459
CREATED:20240603T201614Z
LAST-MODIFIED:20240603T201614Z
UID:961-1728558000-1728561600@pd3.4spe.org
SUMMARY:Environmental Stress Cracking: The Plastic Killer
DESCRIPTION:Find out more here \nIf you deal with plastic components\, then “Environmental Stress Cracking of Plastics” will provide you with information that will enhance your understanding of the interaction between chemicals and plastic resins\, and help prevent premature failure. Environmental stress cracking (ESC) is a phenomenon in which a plastic resin undergoes premature embrittlement and subsequent cracking due to the simultaneous and synergistic action of stress and contact with a chemical agent. ESC is a leading cause of plastic component failure\, and a recent study suggests that 25% of plastic part failures are related to ESC. \nThe webinar will be presented from a practical viewpoint with actual case studies to illustrate the ESC mechanism and explain plastic performance. Topics covered during this session include: \n\nIntroduction to ESC\nHow plastics fail\nExplanation of the ESC failure mechanism\nGeneralizations related to chemical interaction with plastics\nESC resistance testing used to evaluate plastic/chemical compatibility\nCase Illustrations of some common solvent-based failure modes
URL:https://pd3.4spe.org/event/environmental-stress-cracking-the-plastic-killer/
CATEGORIES:Webinar
ORGANIZER;CN="SPE-Inspiring Plastics Professionals":MAILTO:spe@4spe.org
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20241016T080000
DTEND;TZID=America/New_York:20241017T170000
DTSTAMP:20260403T143459
CREATED:20240201T142502Z
LAST-MODIFIED:20240201T142502Z
UID:826-1729065600-1729184400@pd3.4spe.org
SUMMARY:Plastec Minneapolis
DESCRIPTION:Find out more about the event here: https://www.advancedmanufacturingminneapolis.com/en/show-brands/plastec-minneapolis.html?ADTRK=InformaMarkets&utm_source=eloqua&utm_medium=email&utm_campaign=15_NL_PT_Newsfeed_Edit_Sub_20240122&sp_cid=16855&utm_content=15_NL_PT_Newsfeed_Edit_Sub_20240122&sp_aid=32533&sp_rid=842542&sp_eh=b803c81072cdbc16da448ee723a7f636c613f0e00dcd2fa83846273968d3fe25
URL:https://pd3.4spe.org/event/plastec-minneapolis/
LOCATION:Minneapolis Convention Center\, 1301 2nd Ave South\, Minneapolis\, Minnesota\, 55403
CATEGORIES:Conference
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20241017T070000
DTEND;TZID=America/New_York:20241017T170000
DTSTAMP:20260403T143459
CREATED:20240917T124648Z
LAST-MODIFIED:20240917T125324Z
UID:1017-1729148400-1729184400@pd3.4spe.org
SUMMARY:Additive Manufacturing: Printing the Plan for the Future
DESCRIPTION:Hosted by: SPE Cleveland Section \nWe invite you to join our Additive Manufacturing: Printing the Plan for the Future Event! \nHear technical presentations on the newest advances in additive manufacturing related to:\n🔹 Design\n🔸 Materials development\n🔹 Processing equipment\n🔸 Enabling technologies\n🔹 New applications\n🔸 And many more! \nThe conference includes a full day of technical presentations\, plenary and keynote presentations on business trends; breakfast\, lunch and break; exhibits of advanced technologies and an evening networking reception. \n✍ To register\, visit our website at https://lnkd.in/gjsf2eK4 \n💲 $75 for SPE Member\n💲 $150 for Non-Member\n💲 $10 for Students\n🆓 Students can join SPE for FREE \nConferences
URL:https://pd3.4spe.org/event/additive-manufacturing-printing-the-plan-for-the-future/
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20241022T080000
DTEND;TZID=America/New_York:20241022T170000
DTSTAMP:20260403T143459
CREATED:20240826T162041Z
LAST-MODIFIED:20240826T162041Z
UID:992-1729584000-1729616400@pd3.4spe.org
SUMMARY:Unlocking the Secrets of Plastics with Dynamic Mechanical Analysis
DESCRIPTION:In conjunction with SPE: Inspiring Plastics Professionals\, hear from Jeffrey A. Jansen about Dynamic Mechanical Analysis (DMA) during a 4-hour online workshop! \nDynamic Mechanical Analysis (DMA) is a powerful technique for exploring the viscoelastic properties of plastic materials\, offering invaluable insights into their mechanical behavior under various conditions. This comprehensive 4-hour workshop\, ” Unlocking the Secrets of Plastics with Dynamic Mechanical Analysis”\, is designed to equip participants with both theoretical understanding and practical skills in DMA. \nParticipants will begin by exploring the fundamental principles of DMA\, including key concepts like storage modulus\, loss modulus\, and tan delta. The workshop will then delve into the viscoelastic behavior of polymers\, emphasizing the importance of DMA in material characterization.\nReal-world case studies on polymeric materials will provide practical examples of DMA applications in quality control\, material selection\, and failure analysis. The workshop will also address the advantages and limitations of DMA\, and offer insight into data interpretation. \nBy the end of the workshop\, attendees will have a solid foundation in DMA\, enabling them to apply this technique effectively in their work with plastics. \nAccess link here: https://www.4spe.org/i4a/pages/index.cfm?pageID=9047
URL:https://pd3.4spe.org/event/unlocking-the-secrets-of-plastics-with-dynamic-mechanical-analysis/
CATEGORIES:Webinar,Workshop
ORGANIZER;CN="SPE-Inspiring Plastics Professionals":MAILTO:spe@4spe.org
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20241022T080000
DTEND;TZID=America/New_York:20241024T170000
DTSTAMP:20260403T143459
CREATED:20240307T193929Z
LAST-MODIFIED:20240307T193930Z
UID:871-1729584000-1729789200@pd3.4spe.org
SUMMARY:SPE VINYLTEC® 2024
DESCRIPTION:When: Tuesday\, October 22\, 2024 8:00 AM CDT – Thursday\, October 24\, 2024 5:00 AM CDT \nWhere: Marriott Chicago O’Hare\, Chicago\, IL \nSave the Date!\nVinyltec 2024 topics will span the entire range of the PVC industry including the latest technical developments\, market & regulatory updates\, and industry sustainability advancements.
URL:https://pd3.4spe.org/event/spe-vinyltec-2024/
CATEGORIES:Seminar
ORGANIZER;CN="SPE-Inspiring Plastics Professionals":MAILTO:spe@4spe.org
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20241023T110000
DTEND;TZID=America/New_York:20241023T120000
DTSTAMP:20260403T143459
CREATED:20240930T123250Z
LAST-MODIFIED:20240930T123250Z
UID:1028-1729681200-1729684800@pd3.4spe.org
SUMMARY:Material Characterization in Polymer Manufacturing & Recycling
DESCRIPTION:We’re pleased to announce an upcoming webinar hosted by the 𝗦𝗼𝗰𝗶𝗲𝘁𝘆 𝗼𝗳 𝗣𝗹𝗮𝘀𝘁𝗶𝗰𝘀 𝗘𝗻𝗴𝗶𝗻𝗲𝗲𝗿𝘀 (hashtag#SPE) on 𝗢𝗰𝘁𝗼𝗯𝗲𝗿 𝟮𝟯𝗿𝗱\, 𝟮𝟬𝟮𝟰\, 𝗮𝘁 𝟭𝟭 𝗔𝗠 𝗘𝗗𝗧. This session will explore material characterization and its key role in incorporating recycled polymers into manufacturing processes. ♻️ \nRegister Here \nLearn from experts on how thermal analysis and other techniques can enhance sustainability efforts. \n🎤 𝗦𝗽𝗲𝗮𝗸𝗲𝗿𝘀:\n• John E. Estela-García\, Graduate Researcher\, University of Wisconsin-Madison\n• Tim A. Osswald\, Director\, University of Wisconsin-Madison\n• Alec Redmann\, Sector Manager\, NETZSCH Analyzing & Testing \n𝗪𝗵𝗼 𝘀𝗵𝗼𝘂𝗹𝗱 𝗮𝘁𝘁𝗲𝗻𝗱:\nManufacturers\, process engineers\, materials scientists\, and researchers in polymer processing & recycling. \nRegister Here
URL:https://pd3.4spe.org/event/material-characterization-in-polymer-manufacturing-recycling/
ORGANIZER;CN="SPE-Inspiring Plastics Professionals":MAILTO:spe@4spe.org
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20241024T120000
DTEND;TZID=America/Chicago:20241024T130000
DTSTAMP:20260403T143459
CREATED:20240826T172217Z
LAST-MODIFIED:20240923T183452Z
UID:995-1729771200-1729774800@pd3.4spe.org
SUMMARY:Design For Webinar...By Design...Decoration Technique Selection
DESCRIPTION:Join Sussex IM’s Jim Naatz and Matt Rosner for an insightful webinar on plastic product design\, where we will explore various decoration techniques\, including pad printing\, hot stamping\, heat transferring\, and in-mold labeling. Learn how these methods can enhance the aesthetic appeal and functionality of your plastic products. Whether you’re looking to improve durability\, achieve high-definition graphics\, or streamline your production process\, this webinar will provide valuable insights into the best practices for each decoration type. \nRegister Here: https://us02web.zoom.us/meeting/register/tZ0rdOmvrjsjGdTIdxCl4Q9cDQNsRdh6QVrA#/registration
URL:https://pd3.4spe.org/event/design-for-webinar-by-design-decoration-technique-selection/
CATEGORIES:Webinar
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20241031T110000
DTEND;TZID=America/New_York:20241031T120000
DTSTAMP:20260403T143459
CREATED:20241021T190905Z
LAST-MODIFIED:20241021T190905Z
UID:1033-1730372400-1730376000@pd3.4spe.org
SUMMARY:Introduction to Ultraviolet (UV) Stabilization of Thermoplastics
DESCRIPTION:Are you ready to protect your thermoplastic products from the sun’s damaging UV rays? Join our Introductory Training Course to dive into the world of UV degradation and discover how to prevent it! \nIn this course\, we’ll cover: \n\nHow UV degradation affects thermoplastics\nThe different types of UV stabilizers and how they work at the molecular level\nPractical screening and testing methods to assess UV and weathering stability\n\nWhether you’re just getting started with outdoor exposure formulations or looking for the latest advances in UV stabilization\, this course is perfect for you! Don’t miss this chance to strengthen your knowledge and protect your products.
URL:https://pd3.4spe.org/event/introduction-to-ultraviolet-uv-stabilization-of-thermoplastics/
CATEGORIES:Webinar
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20241113T080000
DTEND;TZID=America/New_York:20241114T170000
DTSTAMP:20260403T143459
CREATED:20240201T182800Z
LAST-MODIFIED:20240201T182800Z
UID:832-1731484800-1731603600@pd3.4spe.org
SUMMARY:Expoplast
DESCRIPTION:The only show in Québec dedicated to Plastics\, EXPOPLAST is your chance to discover the industry’s latest innovations\, processes\, and material and learn how they can improve your products….and increase your bottom line. It’s all part of ADM Montréal. \nLearn more here
URL:https://pd3.4spe.org/event/expoplast/
CATEGORIES:Conference
END:VEVENT
END:VCALENDAR