BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//SPE Product Design and Development Division - ECPv6.15.18//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-WR-CALNAME:SPE Product Design and Development Division
X-ORIGINAL-URL:https://pd3.4spe.org
X-WR-CALDESC:Events for SPE Product Design and Development Division
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:America/New_York
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20220313T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20221106T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20230312T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20231105T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20240310T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20241103T060000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:America/Chicago
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20220313T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20221106T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20230312T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20231105T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20240310T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20241103T070000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:America/Denver
BEGIN:DAYLIGHT
TZOFFSETFROM:-0700
TZOFFSETTO:-0600
TZNAME:MDT
DTSTART:20220313T090000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0600
TZOFFSETTO:-0700
TZNAME:MST
DTSTART:20221106T080000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0700
TZOFFSETTO:-0600
TZNAME:MDT
DTSTART:20230312T090000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0600
TZOFFSETTO:-0700
TZNAME:MST
DTSTART:20231105T080000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0700
TZOFFSETTO:-0600
TZNAME:MDT
DTSTART:20240310T090000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0600
TZOFFSETTO:-0700
TZNAME:MST
DTSTART:20241103T080000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20231207T110000
DTEND;TZID=America/New_York:20231207T120000
DTSTAMP:20260403T141550
CREATED:20231122T152013Z
LAST-MODIFIED:20231122T152150Z
UID:735-1701946800-1701950400@pd3.4spe.org
SUMMARY:SPE Webinar: An Overview of Polycarbonate Resin
DESCRIPTION:This webinar is a practical introduction to polycarbonate\, covering: \n\nStructure\nPolymerization\nTypical properties and applications\nAdvantages/disadvantages\nFailure Tendencies\n\nIn particular\, attendees will become familiar with this important resin and understand its properties and potential failures.
URL:https://pd3.4spe.org/event/spe-webinar-an-overview-of-polycarbonate-resin/
CATEGORIES:Webinar
ORGANIZER;CN="SPE-Inspiring Plastics Professionals":MAILTO:spe@4spe.org
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20231109T120000
DTEND;TZID=America/Chicago:20231109T130000
DTSTAMP:20260403T141550
CREATED:20231013T140854Z
LAST-MODIFIED:20231026T130139Z
UID:667-1699531200-1699534800@pd3.4spe.org
SUMMARY:“Design For…” PD3 Webinar Series – "How Manufacturing Process Selection Drives Design Decisions"
DESCRIPTION:Speaker: Michael Paloian \nAbout Webinar: We are pleased to offer our second installment of our Design for… Webinar Series. This presentation will be led by Michael Paloian. Michael will be discussing what we need to consider early on in our design process in regards to the manufacturing process. \nThis free webinar will be a great sneak preview of a larger class that Michael has developed and given to many industry professionals.
URL:https://pd3.4spe.org/event/design-for-pd3-webinar-series-how-manufacturing-process-selection-drives-design-decisions/
CATEGORIES:Webinar
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20231102
DTEND;VALUE=DATE:20231103
DTSTAMP:20260403T141550
CREATED:20231016T123034Z
LAST-MODIFIED:20231016T123117Z
UID:669-1698883200-1698969599@pd3.4spe.org
SUMMARY:ImplementAM - Al McGovern: Developing & Validating a Product for Additive Manufacturing
DESCRIPTION:  \nJoin ImplementAM in Milwaukee for a day of learning\, collaboration\, and networking. Expand your knowledge about the foundational 3D printing technologies and learn about the business cases behind additive manufacturing. We have expert speakers from major 3D printing machine OEMs\, software providers\, and service bureaus. It’ll be a dynamic day involving plenty of networking opportunities as well as group activities designed to get you away from PowerPoint and experience a more interactive learning experience. \nRegister Here: https://www.4spe.org/i4a/pages/index.cfm?pageID=8482
URL:https://pd3.4spe.org/event/implementam-al-mcgovern-developing-validating-a-product-for-additive-manufacturing/
LOCATION:Explorium Brewpub Third Ward\, 143 W St. Paul Ave\, Milwaukee\, WI\, 53203\, United States
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20231016T080000
DTEND;TZID=America/New_York:20231017T170000
DTSTAMP:20260403T141550
CREATED:20230906T140640Z
LAST-MODIFIED:20230906T140745Z
UID:554-1697443200-1697562000@pd3.4spe.org
SUMMARY:Reducing Plastic Waste Through Artificial Intelligence
DESCRIPTION:In this event\, we will explore how artificial intelligence (AI) and digitalization are revolutionizing the plastic industry\, offering robust solutions that can effectively mitigate plastic waste and optimize its usage through increased recycling. By harnessing the power of intelligent algorithms in conjunction with advanced technologies like the Internet of Things (IoT) and geolocation\, waste collection in urban areas can be significantly improved and optimized. \nFind out more here \nSmart bins\, integrated with AI capabilities\, will be highlighted as they play a pivotal role in sorting materials at their source\, maximizing the recycling potential of plastics and other materials. Moreover\, state-of-the-art recycling plants are now incorporating cutting-edge technologies such as image sensors\, various sensors\, and machine learning algorithms\, resulting in enhanced efficiency and precision in the sorting process. This facilitates a more accurate categorization of materials\, contributing to effective waste management. Digitalization technologies will be discussed\, highlighting their potential in enhancing the traceability of products. By enabling efficient identification of material composition\, these technologies play a crucial role in streamlining the recycling process. \nAdditionally\, generative design algorithms will be explored\, showcasing their ability to create innovative products and packaging designs that minimize the use of plastic and materials\, while still meeting performance specifications. During the event\, we will discuss the latest advancements in these technologies and delve into the challenges and opportunities surrounding their implementation. Furthermore\, we will explore the potential impact of these innovations on plastic waste handling. \nThis event serves as a platform for knowledge exchange and sharing insights on these cutting-edge solutions\, highlighting their significance in the ongoing fight against plastic waste.\n\n\n\n\n\n\n\n  \n\n\n\n\n\n\n\n 
URL:https://pd3.4spe.org/event/reducing-plastic-waste-through-artificial-intelligence/
LOCATION:Sheraton Inner Harbor Hotel\, 300 South Charles Street\, Baltimore\, MD\, 21201\, United States
CATEGORIES:Conference
ATTACH;FMTTYPE=image/png:https://pd3.4spe.org/wp-content/uploads/2023/09/2023-09-06_9-05-44.png
ORGANIZER;CN="SPE-Inspiring Plastics Professionals":MAILTO:spe@4spe.org
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20231004T090000
DTEND;TZID=America/New_York:20231004T100000
DTSTAMP:20260403T141550
CREATED:20230918T132143Z
LAST-MODIFIED:20230918T132143Z
UID:586-1696410000-1696413600@pd3.4spe.org
SUMMARY:WEBINAR: Plastics Weathering - From Basic Principles to Recent Developments in Technology and Standardization Registration
DESCRIPTION:Products based on plastics can degrade by the effects of the environment. This webinar addresses the basic principles of polymer degradation caused by the effects of weather. The main environmental stress factors are solar radiation\, heat\, and moisture. Testing of the environmental durability can be done under natural conditions; however accelerated laboratory testing offer the potential of acceleration. Today xenon-arc instruments (full solar simulation) and fluorescent UV instruments are the main technologies used to test the weathering stability of plastics. Modern test instruments offer control of the simulated environmental parameters\, but also measurement of specimen properties\, such as the surface temperature. International weathering standards are the base for reproducible testing. Recent standardization efforts focus on better parameter control and on more realistic simulation of environmental degradation effects. \nPlastics can degrade when exposed to environmental stress – some faster than others. This webinar addresses the basic principles of polymer degradation under the synergetic impact of solar radiation\, heat\, and water. \nThe online seminar will show how weathering testing of plastics can be performed under natural conditions\, but also in the most common laboratory weathering instruments: \n\nFiltered xenon-arc (full spectrum solar simulation\, including UV)\nFluorescent UV (UV only)
URL:https://pd3.4spe.org/event/webinar-plastics-weathering-from-basic-principles-to-recent-developments-in-technology-and-standardization-registration/
CATEGORIES:Webinar
ORGANIZER;CN="SPE-Inspiring Plastics Professionals":MAILTO:spe@4spe.org
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20230928T130000
DTEND;TZID=America/New_York:20230928T140000
DTSTAMP:20260403T141550
CREATED:20230922T200541Z
LAST-MODIFIED:20230922T200541Z
UID:618-1695906000-1695909600@pd3.4spe.org
SUMMARY:3 Challenges of Testing Plastics
DESCRIPTION:The world of plastics is constantly evolving\, with new applications such as high-performance polymers\, additive manufacturing\, and bioplastics continually emerging to transform the field. Common to all applications – old and new – is the importance of mechanical testing that ensures manufacturers are producing quality products. In this webinar we’ll be discussing the specific challenges of testing plastics\, the importance of repeatable and reliable mechanical testing results\, and what you can do to improve your results. \nTopics: \n\nOverview of recent changes in key standards\nFactors that influence test results – solutions and troubleshooting tips\nHow to increase laboratory efficiency and throughput to improve test times
URL:https://pd3.4spe.org/event/3-challenges-of-testing-plastics/
CATEGORIES:Webinar
ORGANIZER;CN="SPE-Inspiring Plastics Professionals":MAILTO:spe@4spe.org
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20230921T120000
DTEND;TZID=America/Chicago:20230921T130000
DTSTAMP:20260403T141550
CREATED:20230831T011323Z
LAST-MODIFIED:20230911T143117Z
UID:465-1695297600-1695301200@pd3.4spe.org
SUMMARY:"Design For..." PD3 Webinar Series - "How Part Design Issues Get Misclassified"
DESCRIPTION:Access the webinar HERE.\nPresenter: Vikram Bhargava \nTopic: “How Part Design Issues Get Misclassified as Material\, Tooling\, and Processing Issues”\n-For a plastic part or assembly to perform as expected\, proper consideration needs to be given by the design engineer to the material selection\, tooling\, processing\, and\, obviously\, the design itself. In many instances\, design errors are misclassified as tooling\, processing\, and material issues. Design errors are sometimes even blamed on customer abuse. Many real-life examples will be used to identify the real issues resulting in failures – improper design. This will be enhanced with a detailed explanation of the ultimate cause for the failure. \nLocation: Microsoft Teams\n(If you are interested in attending the webinar\, please fill out the Contact Us form) \nAbout Vikram: \nVikram Bhargava was nominated a Fellow of the Society of Plastics Engineers 2000 in recognition for his\ninnovation in\, and work on educating engineers in proper plastic part design.\nHe is a founding member and Past Chairman of the Product Design and Development Division. He has\nbeen active in the PD3 since it was a SIG\, and Injection Molding Division since the eighties\, including being its secretary. He has presented dozens of papers at the ANTEC starting in 1999. At least\, one of his presentations was identified as one of the “Best of ANTEC.” He has written for the Plastics Engineering Magazine and\nconducted many free webinars for the SPE – attended by hundreds. He has published dozens of highly sought after White Papers on all aspects of plastic products.\nHe retired as the Director of Mechanical Engineering Services at Motorola Solutions in Holtsville\, NY\nheading an international group of professionals. He has over 40 years of experience in product design\,\ndevelopment\, manufacturing and management\, especially in plastics. He is a sought-after trainer and has\ntrained thousands of engineers and suppliers in the proper design and manufacturing of plastic parts and\nassemblies in the US\, China\, Canada\, Taiwan and India and companies such as Motorola\, Google\, Nvidia\, Hunter\, etc. He is the author of a book on Holistic Product Design published by Hanser in Dec 2017.\nHe is continuing to consult professionally for various organizations as well as a free service to budding\nentrepreneurs. He holds 21 US and International patents.\nVikram has successfully led many Six Sigma projects and is a certified Motorola Six Sigma Black Belt and trainer.\nHe has a BSME from Birla Institute of Technology and Science\, Pilani\, India.\nLinkedin: www.linkedin.com/in/bhargavavik/\nBook: https://www.hanser-fachbuch.de/fachbuch/artikel/9781569905807\nWebsite: https://vikpedia.org/\nWhite Papers and Webinars: https://dfmpro.com/?s=vikram+bhargava
URL:https://pd3.4spe.org/event/design-for-pd3-webinar-series/
CATEGORIES:Webinar
ATTACH;FMTTYPE=image/jpeg:https://pd3.4spe.org/wp-content/uploads/2023/08/Vikram-Bhargava-SPE.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Denver:20230327T140000
DTEND;TZID=America/Denver:20230330T140000
DTSTAMP:20260403T141550
CREATED:20230321T184902Z
LAST-MODIFIED:20230321T185440Z
UID:205-1679925600-1680184800@pd3.4spe.org
SUMMARY:ANTEC® 2023
DESCRIPTION:SPE is hosting ANTEC® 2023 at the Hilton Denver City Center\, Denver\, CO from March 27–30\, 2023. \nANTEC® 2023 will showcase the latest advances in industrial\, national laboratory\, and academic work. Learn about new findings and innovations in polymer research\, products\, and technologies. At ANTEC® 2023\, there will be multiple opportunities to spend time with colleagues at SPE-hosted meetings\, receptions\, networking luncheons\, and SPE Chapter networking events.
URL:https://pd3.4spe.org/event/antec-2023/
LOCATION:Hilton Denver City Center\, 1701 California Street\, Denver\, CO\, 80202\, United States
CATEGORIES:Conference,Event
ATTACH;FMTTYPE=image/jpeg:https://pd3.4spe.org/wp-content/uploads/2023/03/ANTEC23_event_banner.jpg
ORGANIZER;CN="SPE-Inspiring Plastics Professionals":MAILTO:spe@4spe.org
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20230117T110000
DTEND;TZID=America/New_York:20230117T120000
DTSTAMP:20260403T141550
CREATED:20221207T201855Z
LAST-MODIFIED:20221207T201855Z
UID:114-1673953200-1673956800@pd3.4spe.org
SUMMARY:In-Plant Recycling and Reclaim of Plastic Scrap for Improved Sustainability
DESCRIPTION:Producers of extruded/molded products have three main options when dealing with their own internal scrap 1) reuse it\, 2) sell it\, or 3) dispose of it. For all three\, some type of re-processing is usually beneficial. In this course we will review the logistics\, economics\, and processing technologies typically used for extruded/molded products\, with the main focus on the in-house recovery of scrap that is then fed back into the raw material stream—an important first step in your plant’s sustainability journey. Join us as we listen to Dana Darley\, Business Development Manager at Vecoplan LLC\, discuss the process by which we recover our waste to reduce our environmental impact and improve the sustainability of our raw materials. \nThe goals of the program are to provide the information required to process scrap material for efficient disposal\, transport\, or re-sale\, to evaluate the economic justifications for bringing scrap reprocessing capabilities in-house\, and to review the processing technologies required for the introduction of scrap material back into the primary production lines. \nAbout the Speaker\nDana Darley manages business development and complex applications for the Plastics Division of Vecoplan LLC\, a leading manufacturer of size reduction\, separation\, and recycling systems. Holder of two US patents\, Dana earned a degree in Mechanical Engineering from Clemson University and has been involved in the design\, development\, marketing\, and sales of plastics processing and recycling equipment for over 40 years. \nWhere\nThe Polymers Center of Excellence\, Inc.\, 8900 Research Dr.\, Charlotte\, NC 28262 or via Zoom. \n\n\nRSVP\nPlease contact Daeng Hawkins to register: dhawkins@polymers-center.org or phone\, +1 704.602.4100
URL:https://pd3.4spe.org/event/in-plant-recycling-and-reclaim-of-plastic-scrap-for-improved-sustainability/
LOCATION:The Polymers Center of Excellence\, 8900 Research Dr.\, Charlotte\,\, NC\, 28262\, United States
END:VEVENT
END:VCALENDAR